Astrid E - F5J rc glider - 200cm/78in - KIT
Astrid E F5J class glider
IMPORTANT!
KIT contains elements for building the model and you have to glue it yourself.
Astrid is an F5J class glider - a lightweight glider prepared for engine installation. Structural wings made of balsa and 2mm plywood, together with a carbon girder, provide adequate structural rigidity and simplicity of construction.
The weight of the ready-to-fly glider is about 450g - it is recommended to use lightweight foils such as oracover light.
The glider has an aluminum frame for the motor(included) Hyperflight 1806 - 2450kv (5mm axle) and 25mm cap, which must be purchased separately.
The design provides stable flight and literally flies by itself :) - the glider is very stable.
KIT Version includes:
- aluminium motor mount
- laser cut elements from balsa wood
- laser cut elements from plywood
- 3d printed elements (stab mount)
- carbon tubes
- nylon wing bolts
- pushers
- control levers
- model building plan (instruction)
- stickers
What you need to have to build and fly:
- 4x servo 9g (max 9mm thickness, torque: 1-1.6kg)
- 2S Li-Po battery
- micro receiver (min. 3-channels)
- motor: Hyperflight 1806 - 2450kv (with 5mm threaded shaft)
- spinner: 25mm diameter
- folded propeller: 7x4
- Oracover or Monocote foil or other lightweight covering material
- wood glue
- CA glue thin and thick
Technical data:
- flight weight: ~450-500g
- wingspan: 1984mm / ~ 59in
- length: 1207mm / ~ 35,5in
- wing profile: ag35-38
- wing area: 34dm2