Freya HLG - RC glider - 150cm/59in - KIT
Start flying in thermals!
A model designed for people who start their adventure with thermal flying, fly without an engine. For those who like classic designs and adhere to the principle of "balsa flies better".
IMPORTANT!
KIT contains elements for building the model and you have to glue it yourself.
FREYA HLG BUILD MANUAL
KIT Version includes:
- laser cut elements from balsa wood
- laser cut elements from plywood
- 3d printed elements
- carbon tubes
- nylon wing bolts
- steel nuts
- bowdenes and pushers
- control levers
- model building plan (instruction)
What you need to have to build and fly:
- 2x servo 5-9g
- 2S Li-Po battery (you can use any capacity - it must fit and not be too heavy <70g)
- receiver (2-channels)
- BEC voltage regulator (you can opt out of it using a Li-Po 1S battery)
- Oracover or Monocote foil or other lightweight covering material
- wood glue
- CA glue thin and thick
What you need fly:
- 2S Li-Po battery (you can use any capacity - it must fit and not be too heavy <70g)
- receiver (2-channels)
- 2x 5-9g servos
- ubec (if You will use 2S Li-Po Battery)
Technical data:
- flight weight: ~300g
- wingspan: 1500mm / ~ 59in
- length: 900mm / ~ 35,5in
- wing profile: hn1033
- wing area: 24 dm2
- wing loading: 12.5 g / dm2