Astrid E LITE – F5J RC glider – 200cm/78in – KIT

Astrid is an F5J class glider – a lightweight glider prepared for engine installation. Structural wings made of balsa and 2mm plywood, together with a carbon girder, provide adequate structural rigidity and simplicity of construction.
The weight of the ready-to-fly glider is about 450g – it is recommended to use lightweight foils such as oracover light.
The glider has an aluminum frame for the motor(included) Hyperflight 1806 – 2450kv (5mm axle) and 25mm cap, which must be purchased separately.
The design provides stable flight and literally flies by itself 🙂 – the glider is very stable.

KIT Version includes:

– aluminium motor mount
– laser cut elements from balsa wood
– laser cut elements from plywood
– 3d printed elements
– carbon tubes
– nylon wing bolts
– pushers
– control levers
– model building plan (instruction)
– stickers

What you need to have to build and fly:

– 4x servo 9g (max 9mm thickness, torque: 1-1.6kg)
– 2S Li-Po battery
– micro receiver (min. 3-channels)
– motor: Hyperflight 1806 – 2450kv (with 5mm threaded shaft)
– spinner: 25mm diameter
– folded propeller: 7×4
– Oracover or Monocote foil or other lightweight covering material
– wood glue
– CA glue thin and thick

Technical data:

– flight weight: ~450-500g
– wingspan: 1984mm / ~ 59in
– length: 1207mm / ~ 35,5in
– wing profile: ag35-38
– wing area: 34dm2